Evo Fermentation System

Control unit

 Control panel

 10.4” color touch-screen Interface (Resolution: 800 x 600 pixels)

 Communication port

 Remote control through Ethernet

 Data export through USB port

 Analog AUX port for system extension

Number of vessels controlled per remote control software

 Max. 16

 Program storage

 Up to 59,994 programs for different kinds of condition

 Log data storage

 Up to 100 process monitoring data files

 Cabinet material

 ABS front panel and painted iron housing

 Dimension

 Footprint: W x D = 15.75" x 23.62" (400mm x 600mm); Height: 29.14" (740mm)

 Rated voltage

 110V~/220V~; 50/60 Hz, 10A

Aeration

 Inlet gas flow-meter

 0, 0.4-5LPM (0.5,1L); 0, 1 - 10LPM (3, 5L);

 0, 2 - 20LPM (10L); 0, 4 – 50LPM (15, 20L)

 Sparger

 Orifice ring

 Baffle

 Removable 316L stainless steel baffles

Temperature

Heating

 1. Thermostat System: built-in heat exchanger  (550W heater, water circulation pump)

 2. Dry heating system (heating blanket or heating base unit)

Cooling

 Cooling coil valve

 Range

 with FS-V-A / B / C series : 5°C (41°F) above coolant up to 60°C (140°F);

 with FS-V-D series :5°C(41°F) above coolant up to 90°C  (194°F);

 Probe

 Platinum RTD probe (PT-100), non autoclavable

 Control mode

 Manual or Programmable 15-step PID control

Agitation

 Drive

 Removable top brushless motor (M3 for 0.5L, 1L; M2 for 3~20L)

 Speed range

 a. For extremely shear-sensitive cell line: 30-300rpm

 b. For fermentation and cell culture: 30 - 1200rpm (0.5-5L); 30 - 1000rpm (10L); 

    30 – 700rpm(15, 20L)

 Resolution

 1rpm

 Impeller

 2 impellers for 0.5L &1L vessel and double jacketed vessels 

 3 impellers for 3L vessel and above 

 Note: Customized impellers are available upon ordering

 Control mode

 Manual or Programmable 15 steps PID control

pH 

 Range

 2 - 12pH

 Resolution

 0.01pH

 Probe

 Gel-filled electrode, autoclavable

 Control mode

 Manual/programmable 15 steps PID control with adjustable deadband,

 pH stat with smart feeding technology

DO

 Range

 0 - 200%

 Resolution

 0.10%

 Probe

 Polarographic DO sensor; autoclavable

 Control mode

 2-stage DO cascade response

 a. Increase or decrease agitation speed 

 b. Oxygen Enrichment module(Optional)

 c. Gas Mixing Station module(Optional)

 DO stat with smart feeding technology

ORP(optional)  

 Measurement range

 -/+ 2000mV

 Resolution

 1mV    

 Probe

 Gel-filled electrode: autoclavable    

Foam / Level

 Probe

 316L stainless steel protector with insulated PTFE tube, autoclavable, adjustable sensitivity control

Control Mode

 Foam: On/Off switch

 Level: On/Off switch control with wet/dry probe set up

Peristaltic Pump

Pump number

 4 x built-in pumps, 1 to 2 external pumps (Optional)

 Motor type

 Precise stepping motor; minimum speed is 1rpm

 Speed range

 0 to 65rpm

 Resolution

 1rpm

 Control mode

 Manual or Programmable 15-step feeding control; pump can be assigned  for Acid, Base,      

 Antifoam and/or Substrate; pump can calculate flow rate and total volume

Exhaust

Device type

 316L stainless steel condenser

Controller

Duo heating system controller

Built-in rotameter

4 x built-in pump heads

Vessel

Double jacketed vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)

Single wall dish bottom vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)

Airlifter vessel (includes glass body, head plate, draft tube, T-handling bar, 2 probe adaptors)

Single wall dish bottom with heating blanket (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating blanket)

Single wall plain bottom with heating base unit (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating base unit)

no impellers

Rushton-type impellers

Baffle assembled

Draft tube assembled

Baffle assembled

Condenser assembled

Air sparger assembled

Micro sparger assembled

Air sparger assembled

Motor

Agitation motor

N / A

Agitation motor

Probes

1x pH probe and 1x pH cable

1x Do probe and 1x DO cable

1x Temperature probe and 1x Temperature cable

1x anti-foam/level sensor and 1x anti-foam/level sensor cable

Start-up Kit

Complete start-up kit includes, silicone tubes, tube clamps, metal connector and autoclavable disc filters

Vessel

Double Jacketed (FS-V-A series)

Single Wall (FS-V-B series)

Air Lifter (FS-V-C series)

Working volume

500ml

1L

3 L

5 L

10 L

1L

3 L

5 L

10 L

5 L

Total volume

1L

1.5L

3.8 L

6.8 L

12.5 L

1.5 L

3.8 L

6.8 L

12.5 L

7 L

Vessel

Single Wall with Heating Blanket (FS-V-B series)

Single Wall with Heating Base Unit (FS-V-D series)

Working volume

1L

3 L

5 L

10 L

15L

20L

3 L

5 L

10 L

Total volume

1.5L

3.8 L

6.8 L

12.5 L

18.7L

23.7L

3.7 L

6.7 L

13.1L

Power source

100-120V / 210-230V, 50-60Hz with electrical safety cutoff switch

Water source

10 psig (0.69 barg), 14.5 psig (1 barg) maximum; (water supplied to fermenter must be softed and at least 15°C below set operating temperature)

Ai